Magloc is a registered trademark of Smart Lock Technology Inc. in the United States Patent and Trademark Office since 1997. Registration number: 75074255
MAGLOC® Speed Slide Racker for Smith and Wession M&P 9, M2.0 Pro all models (Does not fit M&P Shield) #1677
CAN $ 36.50
This slide racker has two edges extended out from the slide on both sides creating a more positive griping surface. Shooters can rack the slide without camping tight on the slide. The slide racker can also be used for one hand chambering by pressing onto the shooter?s holster or other hard objects.
Features:
1. Extended 0.21" (5.4mm) out from the M&P slide for easy gripping or single hand chambering.
2. Made from black anodize 6061 ? T6 Aluminium with 20 RC hardness.
3. Unlike some slide rackers that forms step behind the rear sight, this one Installed flushed with the top of the M&P slide allowing the shooter quicker acquisition of the sight picture.
4. Slide rakcer does not extended too much that hinders conceal carry.
Specification:
1. Fits M&P; M2.0; M&P Pro. (Does not fit M&P Shield)
2. Weight: 0.31 oz (8.7 gram). Original slide cover: 0.09 oz (2.6 gram)
3. Additional length over the M&P slide: 0.29" (7.4 mm).
4. Dimension width 1.49? (37.9 mm), height 0.58? (14.6 mm), racker plate thickness 0.13? (3.4 mm)
(Note: different shooting sports have different limitation on firearms modification; please consult with the proper authority.)
Warning - before installation begins.
1. Always wear eye protection if assembly or disassembly of firearms is required.
2. If you are not comfortable with the installation procedures described below, please have the work done by a qualified gunsmith.
3. Make sure the gun is unloaded before installation begins
**You can also search the web for the installation of Slide Racker for M&P Pistols installation instruction
Installation:
1. Separate the slide form the frame as per S&W M&P manual.
2. Press down the ?spacer sleeve? with a small screw driver.
3. Push the slide cover plate away from the slide while keeping part of your finger covering the rear of the slide to prevent ithe firing pin from jumping out of the slide.
4. Slide the ?slide racker? halfway into the slide until it is stopped by the ?spacer sleeve?
5. Push down the ?spacer sleeve? with the screw driver and press the ?slide racker? further in.
Warning: After installation, test fire your pistol in various shooting position and making sure that your hands would not be in the way of the slide racker. Also test fit with the holster you will be using making sure everything function..
Note: This item with bubble envelope has total thickness less than 2 cm and will be shipped by letter mail at $3.50 within no insurance nor tracking number. Shipping with tracking and $100 insurance is $20. Please email us if you need this service.
**We accept Visa, MasterCard and American Express via "MyVirtualMerchant" (Costco - Elavon Merchant Service). Bank Deposit for purchase within Canada only. Please pay by EMT to: vancouvergunshop@hotmail.com no security answer is required.
